• Light alloy frame, painted in RAL 9010;
• Completely removable aluminium finishing panels, painted in RAL 9010;
• Fire-proof (MUPAM) glass wool thermal insulation
• Internal cell made of 18/8 AISI 304 stainless steel with 15/10 thickness;
• Forced air circulation obtained by 1 fan with a +70°C resistant motor;
• PID electronic regulator with temperature digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• PID electronic regulator with relative humidity control digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• PID electronic regulator with wind speed control digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• PID electronic regulator with digital display for controlling the amount of sand or dust to put into circulation and with RS 422 serial interface, which can be monitored from a compatible PC;
• High and low temperatures fail-safe electronic thermostat;
• High temperature fail-safe mechanical thermostat, connected to an automatic thermostat with spring release coil
• Door safety switch
• Emergency button;
• Electric system with moulded modular components to make possible maintenance operations easier and quicker;
• All instruments are placed in the powerboard on the front of the chamber.

• Range: +20°C to + 70 °C;
• Precision: ± 0.5 °C after stabilisation;
• Heat-up and cool-down rate: average of 2 °C/min in temperature range of +20°C to +70°C

DEHUMIDIFICATION

• Air dehumidification is achieved using a HIROSS compressed air dryer.

AIR SPEED

• Range: 1.5 to 8.9 m/sec (± 1m/sec);
• Ventilation is controlled by an inverter, which is directly monitored by the control device.

• The quantity of sand and dust is monitored by the control device and by two opacimeters which are placed outside the test room with two stainless steel pipe supports.

Serie TSP 1000 Camera per prove di sabbia e polvere, volume utile 1 m/c, altri volumi come su richiesta del Cliente.