• Light alloy frame, painted in RAL 9010;
• Completely removable aluminium finishing panels, painted in RAL 9010;
• Fire-proof (MUPAM) glass wool thermal insulation;
• Internal cell made of 18/8 AISI 304 stainless steel with 30/10 thickness;
• Chamber reinforcements with rectangular tubes made of 30/10 thick 18/8 AISI 304 stainless steel;
• Forced air circulation obtained by 1 or more fans with blades with external extended axis motor equipped with automatically lubricated sealing ring;
• PID electronic regulator with temperature digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• PID electronic regulator with vacuum digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• High and low temperature fail-safe electronic thermostat;
• High temperature fail-safe mechanical thermostat, connected to an automatic thermostat with spring release coil;
• Door safety switch;
• Emergency button;
• Electric system with moulded modular components to make possible maintenance operations easier and quicker;
• SAll instruments are placed in a drawer on the front of the chamber.

• Range: - 40°C to + 150 °C;
• Precision: +  0,5 °C after stabilisation;
• Heat-up and cool-down rate: average of 2 °C/min in temperature range of – 40° to 150°C
• OPTION: linear heat-up and cool-down rate 5, 7, 10°C/min up to -30°C

• Range: from 1000 mBar to 0 mBar in 15 minutes;
• Precision: + 3 mBar.

• Range: - 70°C to + 150 °C;
• Precision: +  0,5 °C after stabilisation;
• Heat-up and cool-down rate: average of 2 °C/min in temperature range of – 70°C to 150°C
• OPTION: linear heat-up and cool-down rate 5, 7, 10°C/min up to -54°C.

• Range: from 1000 mBar to 0 mBar in 15 minutes;
• Precision: + 3 mBar.

THA RANGE
Single and two-stage humidity control thermobaric chambers – temperature range –40°C / - 70°C + 150°C

• PID electronic regulator with relative humidity digital display and with RS 422 serial interface, which can be monitored from a compatible PC;
• Electronic capacitive probe to determine relative humidity as a percentage;

HUMIDIFICATION SYSTEM

• The humidification system is operated by a steam generator, which is directly monitored by the control device;
• Polyethylene tank for supplying the steam generator with distilled water, so as to avoid limescale deposits on the components tested;

DEHUMIDIFICATION SYSTEM

• Dehumidification will take place through the condensation of humidity on a specific large refrigerated battery, in order to assure dehumidification gradient volumes.
  The chamber is built so that the condensate is automatically drained off the chamber.

   PERFORMANCE

   RELATIVE HUMIDITY

• Range: from 10% to 98% of climatic range from 10°C to 95°C with dew-point limitation
• Precision:  +  0,5% +  2%;

Serie THA with LCD PC and touch screen Serie TCA Cooling System realized for collaudi di satelliti

Serie THA -70°C to + 150°C